Are Ghost Autowatch Immobiliser The Same As Everyone Says?
Autowatch Ghost Immobiliser
Ghost Immobiliser is a renowned product that protects your vehicle against key-cloning hacking and theft. This TASSA-verified system is undetectable by thieves and blocks your vehicle from starting.
This device is silent and uses buttons located on the steering wheel, centre console, and door panels of your vehicle to allow you to create an individual PIN code that is up to 20 characters long that must be entered before the car starts.
Easy to install
It is more crucial than ever to secure your vehicle. With car thefts on the rise and cloning tools easily available, it's vital to protect your vehicle. Our Autowatch Ghost immobiliser is a secure and discreet aftermarket solution to protect against key-cloning & car theft. The unit is virtually invisible to thieves, and functions through buttons on the steering wheel or the door panels. This allows customers to create a unique disarming sequence similar to the credit card which must be entered before a vehicle can be driven or started away. This makes the system virtually impossible to spot and is not affected by jamming or spoofing devices that are used in other systems on the market.
The installation of the Ghost unit is a highly skilled process and should only be completed by an approved installer. The unit is carefully integrated into the CAN bus network of your vehicle which ensures that it is communicating directly with the ECU. This allows the Ghost to be installed without changing the factory settings, and also ensures that it can't be hacked by a burglar using signal boosters or other methods.
When the Ghost is fitted with a new and improved sequence to disarm is required to be inputted in order to start your car. Press the service button 5 times in two seconds, but be sure you don't press it for too long. The system will flash twice to show that Transport Mode is active. This feature is great for classic, sports or luxury vehicles that have to have their security system temporarily disabled during transportation or servicing.
Once Transport Mode has been activated, the immobiliser is turned off and is not reactivated by entering your PIN code again. This feature is perfect for those who would like to store their vehicles over the winter months to keep theft, or to avoid paying higher insurance rates.
There are no keyfobs or LEDs or other indicators that can help you locate it.
The Ghost immobiliser protects your car from thieves using buttons located on the dashboard or on the steering wheel. You can enter a pin number without being noticed before you start the engine. It prevents signal relay attacks, ECU swapping and key cloning. It can also be linked to a smartphone application that allows remote arming and disarming. It's simple to install and can be incorporated into a wide range of vehicles. It is also very stealthy and can be concealed in places that are difficult to reach, such as behind the dashboard or within the trim on the steering wheel.
It's a great option for high-performance vehicles because it will disable the ignition system of your vehicle if an incorrect pin code is entered, preventing thieves from taking away your joy and pride. The device can even send an alert to your mobile when you've left the vehicle without a key in public areas, giving you peace of brain when you're away from your car.
The Ghost is different from other immobilisers because it doesn't require any additional fobs or LED indicators. It is also able to be concealed in a hard-to-find area of your vehicle. It communicates directly with the vehicle's CAN data network, making it extremely resistant to detection. It also doesn't emit radio signals, which makes it not detected by RF scanners, or signal jammers.
It's designed to be tamper proof and weatherproof, and can endure extreme temperatures. It is also impossible to alter by cutting wires, or dismantling it. Moreover, it doesn't require any circuit cutting to function, so it's undetectable to organized gangs of thiefs who use diagnostics devices to detect the security systems fitted to. It's not affected by professional diagnostic equipment that examines CAN data for the presence or absence of a security system.
No circuit cuts
The ghost device doesn't have any LED indicators or key fobs that would indicate its whereabouts. It is hidden beneath the steering wheel or dashboard of your vehicle and uses buttons to create a unique PIN sequence that must be entered to turn on the engine. This means that even if the person who stole your keys does have them, they can't drive the car away because they wouldn't know the correct PIN code sequence. The device also does not transmit radio signals meaning that organised thief gangs using diagnostics reading devices will not be able to recognize the device.
This advanced immobiliser, that is also TASSA-approved can help you reduce your insurance costs. This is particularly true for modified vehicles that owners have customized. It also helps prevent key theft and ECU switching, which means the only possible method for a criminal to take your pride and joy is to pull it away.
As the system does not make use of the factory key fobs or the dashboard buttons it is a completely silent device that communicates with your ECU via the CAN data circuit, which is completely silent and gives no indication that it is fitted. This means that thieves can't replace the ECU or install new key fobs in order to get your car started.
If you forget your PIN code our engineers have provided a reset emergency for the device that allows you to enter "service mode". This allows the technician or dealer to temporarily start and drive your car enabling them to carry out maintenance work, MOTs or valet parking without needing to enter the PIN code once more. Once the technician has finished their job or you've removed your vehicle, simply enter the PIN code and the device will exit service mode depending on the speed and time.
No radio signals
In contrast to other security systems the Ghost immobiliser does not use an alarm system or key fobs to prevent vehicles from starting. Instead, it communicates with the vehicle's ECU and CAN data circuits to prevent the engine from starting. It's a discrete solution, which is not affected by key-cloning techniques or radio frequency scanning used by thieves to avoid security devices. It can be used in conjunction with tracking devices to increase the security of your vehicle. You will also be alerted when there is a chance to alter or steal.
The Autowatch Ghost is a TASSA-certified device that is insurance approved and offers superior protection against key hacking, the cloning process, and even theft. It uses a mobile application to control the device. It is encrypted to protect. It also has an emergency PIN code override. It is an effective, discreet and cost-effective way to safeguard your vehicle from theft.
Ghost isn't without its problems. Users frequently have difficulty completing the correct disarming sequence. The device requires input via buttons already present on your vehicle, such as those found on the steering column or on the centre console. It can be difficult for users to remember or get wrong especially when the device is being used for the first time. It is recommended to read the manual that comes with the device to understand this and practice the disarming process before driving the vehicle.
Another issue is that some vehicles are experiencing issues with the CAN data connection, which can impact the functionality of the Ghost. This could be due to malfunctioning sensors or an damaged OBD port. It is best to check the system before using it in the event that the CAN connection has any issues.
It is easy to change the PIN code
The Ghost is a fantastic device that has taken the market by storm however the process of changing the pin code is a bit hazy. The device is pre-programmed by the installer when it's installed however, there are times when customers may want to change this due to a variety of reasons, such as they'd prefer a different button to disarm the device and they don't want the installer to know or they simply don't like their current pin code. ghost immobilise is the change over to a new pin number is very simple. Follow these simple steps to find out how.
Please note: You will need to turn on the vehicles ignition but do not start the engine! The process takes only just a few seconds to complete. The vehicle will then return to normal operation.